Instructions: . Method of Applications:. Hand. DA polisher. Rotary. Directions: Shake Well. Always work on a cool, properly cured paint surface. DA application: Apply directly to appropriate Soft Buff 2.0 Foam Pad. Set machined to 4-5. Apply moderate pressure on initial 2-3 passes followed with light pressure for following two passes. Wipe off residue immediately after each panel. Rotary application: Work one section at a time. Set rotary buffer to approximately 1000-1500 RPM's. Use with Meguiar's Soft Buff 2.0 Foam Pads. To prime new or dry pads, mist on M34 Final Inspection. Apply M205 Ultra Finishing Polish directly to the paint surface and begin working in a 2' x 2' area with overlapping passes. Continue working until light film remains. Wipe remaining residue with a Meguiar's Ultimate Wipe (M9910). For extreme gloss, apply with Meguiar's G110v2 Dual Actions Polisher with a W9207 Soft Buff 2.0 Finishing Pad. Tips: For best results use with Meguiar's Soft Buff 2.0 Foam Pads; Finishing-W9207 or Polishing-W8207. For ultimate results, clean buffing pad frequently. To achieve swirl free finish apply moderate pressure on initial passes, reducing pressure gradually with very light pressure on final passes.